Mercedes-Benz C/GLC Ambient Lighting Seven-Piece Set

Product Summary

Part One：Installation precautions

1.      It is recommended that individuals without professional expertise refrain from self-installing the equipment to prevent potential damagetothe machine and mitigate any associated accidents.

2.      Prior to installing, please conduct a thorough inspection of all vehicle functions to ensure proper operation and check for any interior surface scratches. If any issues are identified, promptly notify the customer.

3.      Before disassembling, installation personnel should remove all metallic objects and other hard items from their bodies in order to safeguard car seats and interior decorations against potential damage during the disassembly process.

4.      During installation, pay close attention to properly store removed car components in order to avoid scratching the dashboard. Additionally, ensure thorough cleanup of any debris left behind during wiring and take care not to leave anything inside the vehicle. Properly insulate wire connections to prevent short circuits.

5.      Wiring should be conducted with careful consideration due to limited space available for installation within the vehicle. Strive towards minimizing occupied space for easier main unit installation while planning out appropriate routing for main unit connection cables. Avoid interference with movable parts such as steering shafts, throttle pedals, and brake pedals whenrouting wires; once wire harness routing is completed, secure it adequately to prevent detachment.

6.      To avoid damaging either the main unit or accessories through hot plugging/unplugging operations, refrain from connecting or disconnecting cables or accessories while the device is powered on.

Part Two：Product wiring instructions and key usage

1.      Main Control Box: The red wire of the power supply is connected to ACC

(1) The ground wire is grounded. In the main control box, ACC is the position for power input (standard configuration)

(2) KEY is the position for the button (standard configuration)

(3) SK is the position for sound control or remote control (optional)

Note: RGB main control box wiring: RGB1 is for connecting the handle light, contour light and horn light. If it is a color-changing box LED1, connect it to the driver's color-changing light strip. RGB2 is for connecting the foot socket and storage light. The main control box of the Phantom Color (HC) is connected to the phantom color light strip on the passenger side. (Figure 1)

2.      Key usage: A single key is used to control the color and mode of the lights. Press and hold the key for 5 seconds to turn off all the lights, and press and hold it for 1 second to turn on all the lights.

3.      The correct wiring method for the power cord of the Sub-control box (the red wire should be connected to the positive terminal of the power supply, and the black wire must not be connected to the door screw but to the ground wire of the wiring harness;!!)

Reference for lighting installation positions：

Part Three：Common Fault Problem Solutions

fault phenomenon

common reason

solution

The light doesn't work after the product is installed

The ground wire (black) of the power cord in the main control box is not properly connected. Is the ACC (red) wire connected in parallel to the ACC fuse? 2) The switch on the mobile phone APP or mini program is turned off

1) Ensure that all wires are connected correctly and in good condition; 2) The switch on the APP or mini-program should be turned on.

The color of the light is abnormal

lamp wire has fallen off or short circuited.

the substitution method and test with a different set of lights

The mobile APP or mini program cannot control it

Whether the Bluetooth and phone location of the mobile phone are turned on

Turn on the Bluetooth and location switch of your mobile phone, and then click the Bluetooth switch on the APP and mini-program to connect the Bluetooth of the ambient light.

The keys cannot be controlled.

The key socket is not properly plugged in and the key cable has come loose.

Replace the button and reinsert it

The ambient lighting cannot be color adjusted in different zones

The APP or mini-program does not have the corresponding point partitioning function

Enable the partition function in the mobile APP or wechat mini-program

Part Four：Electrical performance parameters of the ambient light control box

1.      Operating voltage: DC 6V-20V;

2.      Standby current: < 10mA

3.      Control methods: AAP, wechat mini-program control, key control, voice control or remote control.

4.      The RGB output mode of the small lamp: common anode mode (three negative and one positive

5.      Output voltage: DC+5V, maximum output current: 3A

6.      Standard output power: 15W (5V /3A)

7.      Operating temperature:-30 to 75 degrees; Storage temperature:-40 to 85 degrees Celsius; Working humidity: 40% to 80%

The ambient light control mini-program and APP: (Note: When installing and using the mini-program, you need to turn on your phone's location and Bluetooth.